The SPA1000 Kit is the most powerful of the Stereo Power Amplifier kits. It produces 2 x 380W at 8Ω, 2 x 680W at 4Ω and enormous 2 x 1100W burst power at 2Ω. It contains a set of Ground Sound modules to build a high performance amplifier. There is a bit of wiring, but pretty easy to do and all the nessacary wires are included. The wires has to be soldered as we rely mostly on soldered joints - which will perform for a very long time. The AmpC modules makes the amplifier smooth running at power on and off. The Transformer is custom-made and has sufficient power for two PA6CC modules. The PSU12DB is the "battery" of the amplifier - it has dual bridge rectifiers to lower the noise of the power ground and giving better conditions for the transformer. The PA6CC amplifier modules has very good sonic qualities, which several of our customers has discovered. Our amplifier modules are Class AB, but the bias current is low - for this reason you don't have to build the amplifier around a very huge heat sink...

• 2 pcs. PA6CC - Power Amplifier module 600W
• 1 pcs. PSU12DB - Power Supply
• 1 pcs. AmpC - Soft Start and mute control
• 1 pcs. TR1000VA - Toroidal Transformer 2 x 65Vac
• Wires for all internal connections