Toroidal transformer 2 x 35Vac - 230Vac/50Hz
Using this transformer in a traditionally configured power supply will give rail voltages around +/-50V unloaded. A
rail voltage of 50V will give a normal configured amplifier an output power around 100W at 8 Ω and 180W at 4 Ω.
Under load the transformer voltage will be lower depending upon the specific load and therefore you will not get the thereoratical
calculated output power of 156W at 8 Ω and 312W at 4 Ω. There are also losses at the bridge rectifier, amplifier
module and to some extend in the cables.